Synco 21-10045 G2(A2) 2-Channel Wireless Microphone System (2110045)

Synco 21-10045 G2(A2) 2-Channel Wireless Microphone System (2110045)

The Synco 21-10045 G2(A2) dual wireless microphone system records two sound sources at the same time using 1 receiver and 2 transmitters. It uses 2.4GHz digital transmission technology and onboard displays to help keep key indicators easy to read while you work.

Record two sources at once

G2(A2) includes 1 receiver and 2 transmitters, so it can capture 2-person dialogue and support a wide range of content creations.

• Dual wireless microphone system with 1RX + 2TX
• Records two sound sources at the same time

See key status at a glance with true-colour TFT screens

A true-colour TFT display on both the transmitter and receiver shows main indicators such as recording mode and battery status. The displays keep these figures readable under different light intensities.

• TFT display on each device
• Displays recording mode and battery status

Stable transmission and reduced interference up to 200 m

The SyncoderTM Encrypted Transmission Algorithm 4.0 enhances signal stability within 656 ft / 200 m (line-of-sight) and 164 ft / 50 m (non-line-of-sight). It runs Frequency Hopping Spread Spectrum (FHSS) and turns to the optimal frequency to help prevent signal conflicts, protect privacy, and reduce interference.

• SyncoderTM Encrypted Transmission Algorithm 4.0
• 200 m max range (line-of-sight)
• FHSS frequency switching to help avoid conflicts

Flexible control for more recording conditions

One-button mute pauses the system for situations like team communication or device setup without completely turning it off. The system also supports 6-level gain control on the transmitter and receiver, one-click noise reduction, and real-time monitoring so you can hear what is recorded and what comes from the recording device.

• One-button mute function
• 6-level gain control on TX and RX
• One-click noise reduction
• Real-time monitoring

Protect recordings from unexpected spikes

G2(A2) offers three recording modes: Mono, Stereo, and Safety Channel. When Safety Channel mode is activated, the audio recorded into the right channel records 6 dB lower to help avoid unforeseen audio spikes caused by noises from vehicles, weather, and other scenarios.

• Mono, Stereo, and Safety Channel recording modes
• Safety Channel records the right channel at -6 dB

Low-latency output for immediate use and live broadcast

A Digital Signal Processor (DSP) chip optimizes the signal from input to output directly. Full synchronization of signal capture, processing, and delivery supports almost zero latency transmission and quality sound production, and the product description notes it works well for immediate use and live broadcast.

• DSP chip for direct input-to-output optimization
• Almost zero latency transmission

Charge all units together and keep rolling up to 8 hours

A 3-in-1 charging solution charges 2 transmitters and 1 receiver at the same time from one power source. It takes 40 minutes to reach 50% power and 1 hour to reach 80%, and the capacity-expanded battery supports 8-hour continued working when fully charged.

• 3-in-1 charging for 2TX + 1RX
• 40 min to 50% power
• 1 hour to 80% power
• Up to 8 hours continued working when fully charged

Pocket-sized compatibility for a wide range of devices

Each transmitter and receiver weighs only 39 g and measures 52 × 42 × 17 mm for discreet placement. G2(A2) provides TRS output and universal digital Type-C output, and it supports devices such as cellphones, laptops, cameras, and loudspeakers.

• 39 g per TX and RX
• 52 × 42 × 17 mm size per unit
• TRS output and universal digital Type-C output

Magnetic mounting and low-profile placement options

Magnetic back clips allow the units to adsorb directly on metal surfaces. Supplied magnets help hide the transmitter inside clothes for low-profile recording.

• Magnetic back clips for metal surfaces
• Supplied magnets for hiding TX under clothing

---

Frequently Asked Questions

1. What recording modes does the SYNCO G2(A2) support? It offers Mono, Stereo, and Safety Channel recording modes.
2. What happens in Safety Channel mode? When Safety Channel mode is activated, the right channel records 6 dB lower to help avoid unforeseen audio spikes.
3. What is the transmission range? It supports up to 656 ft / 200 m line-of-sight and 164 ft / 50 m non-line-of-sight.
4. What is the latency of the G2(A2)? It is about 20 ms.
5. Can I use three sets of G2(A2) in the same place? Yes. It is feasible to use three sets in one place, and SYNCO advises placing each receiver 50 cm to 1 m away from each other.

Add the SYNCO G2(A2) dual wireless microphone system to your cart to capture two sound sources at the same time with flexible monitoring and control options. Contact or visit Gibbys Electronic Supermarket for expert advice on choosing the right wireless microphone setup for your content workflow and compatible devices.