✨ New Arrivals Just Dropped!Explore
JBL Club A754 4-Channel Car Amplifier with 75W RMS x 4
HomeStore

JBL Club A754 4-Channel Car Amplifier with 75W RMS x 4

JBL Club A754 4-Channel Car Amplifier with 75W RMS x 4

$127.59

Original: $364.54

-65%
JBL Club A754 4-Channel Car Amplifier with 75W RMS x 4

$364.54

$127.59

The Story

JBL Club A754 4-Channel Car Amplifier with Variable Crossover and Preamp Outputs

The JBL Club A754 car amplifier delivers 4-channel amplification for front and rear speakers, with flexible input options that fit both factory and aftermarket car stereo systems. It gives you more control over system tuning and channel configuration, so you can match the amplifier to your speakers, subwoofer setup, and vehicle layout.

Fits More Vehicles with a Compact Chassis

The low-profile chassis and small overall footprint help this amplifier fit in vehicles where space is limited. That matters when you want added amplification without giving up valuable installation space.

  • Compact size
  • Low-profile chassis
  • 320mm x 51.3mm x 180mm

Flexible Power for Different System Layouts

This 4-channel amplifier supports several system configurations, because it can power front and rear speakers in 4-channel mode or switch to bridged operation for other setups. It also supports 3-channel mode, which lets you run a pair of full-range speakers and a subwoofer from one amplifier.

  • 75 watts RMS x 4 at 4 ohms
  • 100 watts RMS x 4 at 2 ohms
  • 200 watts RMS x 2 at 4 ohms in bridged mode
  • 4-ohm stable in bridged mode
  • 3-channel mode for full-range speakers and a subwoofer

Dial In Your System with Variable Crossovers

Separate high-pass and low-pass crossovers on the front and rear channels give you more precise control over roll-off. As a result, you can tune the amplifier to better suit speaker placement and cabin acoustics.

  • Variable electronic crossovers
  • Separate high-pass and low-pass crossovers on front and rear channels
  • 32-320 Hz crossover range
  • 12 dB/octave slope

Integrates with Factory and Aftermarket Stereos

Speaker-level and low-level inputs make it easier to add this amplifier to a wide range of car audio systems. The input level control also adjusts sensitivity for either signal type, which helps match the amplifier to the source unit.

  • High- and low-level inputs
  • Preamp and speaker-level inputs
  • Input sensitivity: 200mVrms to 2.0 Vrms with low-level inputs
  • Input sensitivity: 2Vrms to 20Vrms with high-level inputs
  • 4 bare wire-to-RCA adapters included

Expand Your System Without Splitters

Full-range preamp outputs support multi-amplifier setups, therefore you can feed an additional amplifier without using splitters. This keeps system expansion straightforward when you plan to add more channels later.

  • Full-range preamp outputs
  • Feeds an additional amplifier without using splitters

Maintains Clean Signal at High Output Levels

Balanced Differential Inputs help keep noise and distortion low, even at high output levels. They also make the amplifier far less susceptible to line-induced engine noise, which helps preserve cleaner sound in the vehicle.

  • Balanced Differential Inputs
  • Low noise and distortion
  • Reduced susceptibility to line-induced engine noise

Protection Circuitry for Everyday Use

On-board circuitry monitors for common fault conditions to help protect the amplifier during operation. An LED indicator shows when one of these conditions exists, so you have a clear status check at a glance.

  • Protection from shorts
  • Protection from high temperature
  • Protection from overvoltage and undervoltage
  • LED status indicator
  • 30A x 2 fuse rating

Frequently Asked Questions

  • Can this amplifier work with a factory car stereo?

    Yes. Speaker-level inputs allow it to integrate with factory car stereo systems, and it also accepts low-level inputs for aftermarket systems.

  • Can I use it for a subwoofer setup instead of four speakers?

    Yes. You can bridge it to 2-channel mode to drive a couple of subs with 200 watts RMS, or use 3-channel mode to power a pair of full-range speakers and a subwoofer.

  • How does it help with system tuning?

    It includes separate variable high-pass and low-pass crossovers on the front and rear channels, with a 32-320 Hz range and a 12 dB/octave slope.

  • Can I add another amplifier later?

    Yes. Full-range preamp outputs let you feed an additional amplifier without using splitters.

Add the JBL Club A754 car amplifier to your cart to bring flexible 4-channel power and precise tuning control to your vehicle audio system. Contact or visit Gibbys Electronic Supermarket for expert advice on matching amplifiers, speakers, and subwoofers for your next car audio upgrade.

JBL Club A754 4-Channel Car Amplifier with 75W RMS x 4 - Image 2

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

JBL Club A754 4-Channel Car Amplifier with 75W RMS x 4 - Image 3

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

JBL Club A754 4-Channel Car Amplifier with 75W RMS x 4 - Image 4

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

JBL Club A754 4-Channel Car Amplifier with 75W RMS x 4 - Image 5

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Description

JBL Club A754 4-Channel Car Amplifier with Variable Crossover and Preamp Outputs

The JBL Club A754 car amplifier delivers 4-channel amplification for front and rear speakers, with flexible input options that fit both factory and aftermarket car stereo systems. It gives you more control over system tuning and channel configuration, so you can match the amplifier to your speakers, subwoofer setup, and vehicle layout.

Fits More Vehicles with a Compact Chassis

The low-profile chassis and small overall footprint help this amplifier fit in vehicles where space is limited. That matters when you want added amplification without giving up valuable installation space.

  • Compact size
  • Low-profile chassis
  • 320mm x 51.3mm x 180mm

Flexible Power for Different System Layouts

This 4-channel amplifier supports several system configurations, because it can power front and rear speakers in 4-channel mode or switch to bridged operation for other setups. It also supports 3-channel mode, which lets you run a pair of full-range speakers and a subwoofer from one amplifier.

  • 75 watts RMS x 4 at 4 ohms
  • 100 watts RMS x 4 at 2 ohms
  • 200 watts RMS x 2 at 4 ohms in bridged mode
  • 4-ohm stable in bridged mode
  • 3-channel mode for full-range speakers and a subwoofer

Dial In Your System with Variable Crossovers

Separate high-pass and low-pass crossovers on the front and rear channels give you more precise control over roll-off. As a result, you can tune the amplifier to better suit speaker placement and cabin acoustics.

  • Variable electronic crossovers
  • Separate high-pass and low-pass crossovers on front and rear channels
  • 32-320 Hz crossover range
  • 12 dB/octave slope

Integrates with Factory and Aftermarket Stereos

Speaker-level and low-level inputs make it easier to add this amplifier to a wide range of car audio systems. The input level control also adjusts sensitivity for either signal type, which helps match the amplifier to the source unit.

  • High- and low-level inputs
  • Preamp and speaker-level inputs
  • Input sensitivity: 200mVrms to 2.0 Vrms with low-level inputs
  • Input sensitivity: 2Vrms to 20Vrms with high-level inputs
  • 4 bare wire-to-RCA adapters included

Expand Your System Without Splitters

Full-range preamp outputs support multi-amplifier setups, therefore you can feed an additional amplifier without using splitters. This keeps system expansion straightforward when you plan to add more channels later.

  • Full-range preamp outputs
  • Feeds an additional amplifier without using splitters

Maintains Clean Signal at High Output Levels

Balanced Differential Inputs help keep noise and distortion low, even at high output levels. They also make the amplifier far less susceptible to line-induced engine noise, which helps preserve cleaner sound in the vehicle.

  • Balanced Differential Inputs
  • Low noise and distortion
  • Reduced susceptibility to line-induced engine noise

Protection Circuitry for Everyday Use

On-board circuitry monitors for common fault conditions to help protect the amplifier during operation. An LED indicator shows when one of these conditions exists, so you have a clear status check at a glance.

  • Protection from shorts
  • Protection from high temperature
  • Protection from overvoltage and undervoltage
  • LED status indicator
  • 30A x 2 fuse rating

Frequently Asked Questions

  • Can this amplifier work with a factory car stereo?

    Yes. Speaker-level inputs allow it to integrate with factory car stereo systems, and it also accepts low-level inputs for aftermarket systems.

  • Can I use it for a subwoofer setup instead of four speakers?

    Yes. You can bridge it to 2-channel mode to drive a couple of subs with 200 watts RMS, or use 3-channel mode to power a pair of full-range speakers and a subwoofer.

  • How does it help with system tuning?

    It includes separate variable high-pass and low-pass crossovers on the front and rear channels, with a 32-320 Hz range and a 12 dB/octave slope.

  • Can I add another amplifier later?

    Yes. Full-range preamp outputs let you feed an additional amplifier without using splitters.

Add the JBL Club A754 car amplifier to your cart to bring flexible 4-channel power and precise tuning control to your vehicle audio system. Contact or visit Gibbys Electronic Supermarket for expert advice on matching amplifiers, speakers, and subwoofers for your next car audio upgrade.

JBL Club A754 4-Channel Car Amplifier with 75W RMS x 4 | Gibbys Electronic Supermarket